Product Types

AC/DC Power Supplies
Battery Chargers
CCTV Power Supply Cabinets
Chargers
Coil Windings - Design/Manufacture
DC I/P UPS / Chargers
DC to DC Convertor
DC-AC Inverter
Desktop/Workstation UPS
DIN Rail Power Supply
ETSI / 19` Telecom Inverter
Explosion Proof UPS
Fuel Cell DC Converter
GLACIAL POWER INC
Hydrogen Stack Converters/ Hydrogen Stack Chargers
IP67 Waterproof LED Power Supplies
LED Dimmer
LED Drivers
LED Lighting/LED Ribbon Strips
Linear Power Supply
Manual Bypass Switch
Marine Power Supply EN60945
Marine UPS
Medical Approved PSU
Medical UPS Systems
Military Case Studies
Outdoor UPS
PAVA DC UPS Systems
Plug Top / Desk Top Adapters
Power Supply Repair
Rail / Industrial PSU
Safe Zone O Digital Camera
Static Inverter -Emergency Lighting
Toroidal Transformer
UPS Systems
Zone 1 Explosion Proof Battery Box / Solutions

 

:: Hydrogen Stack Converters/ Hydrogen Stack Chargers

A small converter handling up to 500W from a hydrogen stack, with various dc outputs, model dependent. The input and output are ohmically isolated,
making installation very simple. The output has a constant current limit and the unit can be turned on/off remotely, via a logic compatible / stack voltage control input. Note that
connection terminals are underneath.
The unit is intended for use with fuel cell stacks, where maximum power is available at a well defined stack voltage, typically 45% of the stack痴 open circuit voltage. By setting
the 全TACKLIMIT朝 of the converter to this voltage, the unit will start to fold back with high load, balancing the stack at maximum possible stack output. Note: New models, with processor control of the proprietary
全TACKLIMIT朝, will be available soon, correcting for stack variation. Please discuss this option with sales.
A fixed output current limit applies, but normally the stack will limit before the current limit is reached.

キ HIGH OUTPUT POWER IN COMPACT SIZE.
キ REMOTE ON / OFF CONTROL FACILITY.
キ FEATURES 全TACKLIMIT朝 CONTROL.
キ MANUAL OR PROCESSOR BASED VERSIONS.


:: 200W Hydrogen Stack Converter :: SM5460


Input 12- 36VDC, Output 5.0V - 33A

A small converter handling up
to 200W from a hydrogen stack, with various dc outputs, model dependent. The input and output are ohmically isolated, making installation very simple.
The output has a constant current limit and the unit can be turned on/off remotely, via a logic compatible / stack voltage control input. 


 Click to Download Datasheet


29 variants of this product.



:: 500W Hydrogen Stack Converter :: SM5420


Input 12- 36VDC, Output 5.0V - 85A

A small converter handling up
to 500W from a hydrogen stack, with various dc outputs,
model dependent. The input and output are ohmically isolated,
making installation very simple. The output has a constant
current limit and the unit can be turned on/off remotely, via a
logic compatible / stack voltage control input. Note that
connection terminals are underneath. 


 Click to Download Datasheet


39 variants of this product.


Click HERE to Search again.

©Copyright 2006 PDS Design Solutions Limited. All Rights Reserved

eXTReMe Tracker